New Halayb Granite, Vibrant  Grey Granite

Stunning Grey New Halayb Granite

New Halayb Granite diverse mixture of colors and unrivaled durability is what Egyptian Granite is famous for. Granite provides a room a sophisticated impression while maintaining the toughness of one of the hardest natural stone surfaces. It may be used in a variety of building projects. Granite panels are used for wall cladding, grey granite tiles are used for flooring both indoors and outdoors, with different finish and granite slabs are used for cooking surfaces.

New Halayb Granite astonishing grey granite color

New Halayb Granite is famous for its pale-gray and white graining texture that is highly selected for its indoor and outdoor applications. Egyptian granite paving is a gray paving granite, an extremely high-quality granite stone. Dark gray granite paving slabs are hard-wearing natural stone that is most suitable to apply in garden areas and patios. Stunning range of granite worktops and granite kitchen countertops colors

New Halayb Granite is Egyptian Granite tiles come in a variety of shapes and sizes. It can be an amazing choice for your floor and countertops, as it will be a perfect choice to be applied in:

• Interior applications
• Exterior applications
• Outdoor Landscaping

The advantages of using (New Halayb Granite) Egyptian granite stone for indoor or outdoor purposes are:

• Entirely natural beauty
• Luxurious yet practical
• Extremely durable
• Ideal worktop material due to variety of looks and investment value
• Available in a wide array of colors, thicknesses and finishes
• Easy maintenance
• Naturally resistant to staining and scratching
• Suitable for food preparation areas
• Unique appearance
• Easy to install and clean
• Low maintenance

• New Halayb Granite Product information:

The most common intrusive igneous rock in the continental crust is Egyptian granite. It has a medium to coarse grain. Its three basic components are feldspar, quartz and mica, which can be found as dark biotite, silvery muscovite or both.

Granite is formed when silica-rich magmas harden millions of kilometers below the surface of the earth.

New Halayb Granite Product Information

Density: (ASTM C97) 2854 kg/m³

Water Absorption by Weight %:  0.03 %

Compressive Strength:  Mpa (ASTM C170):  204.08

Flexural Strength Mpa (ASTM C800):  32.41

Bending Strength: 10 – 20 N/mm²

Abrasion Resistance Hardness: (Ha) 51.9

Mohs Hardness:  6-8

we would recommend that you seal your granite paving if you are looking for extra peace of mind

New Halayb Granite Available Sizes:

Our factory can produce different size tiles and thicknesses starting from 2 cm and 3 cm. We provide cut-to-size order based on your project’s requirements. Common slabs thicknesses are 2 cm and 3 cm.

Common New Halayb Granite Metric Sizes:

30×60, 40×40, 40×60, 40×80,60×60, 60×90, 80×80, 90×90, 100×00 cm

New Halayb Granite Suitability and applications

• Paving
• Wall cladding
• Worktops
• Slabs
• Cobble stones
• Flooring
• Coping
• Outdoor landscaping
• Kitchen Countertops
• Backsplash

We offer New Halayb Granite products in all dimensions and all finishes

• polished New Halayb Granite slabs, whish is suitable for granite kitchen countertop and worktops
• Flamed paving New Halayb Granite tiles and slabs are suitable for patio and garden It’s a hard-wearing stone that is suitable for all areas of the garden the non-slip and scratch-resistant. It’s a reliable paving choice for patios and walkways due to its earthy and textured finish by exposing the stone to a high-temperature flame. This then causes a sudden expansion of the surface of the stone. The process is better known as the ‘flaming method’. It is commonly used on granite paving stones to make them slip-resistant
• New Halayb Granite setts with light split face finish ,hard split face finish it can then be used for these essential accent pieces where you want to draw the eye to in the garden. And also drive ways Granite sets are small blocks of quarried stone with different sizes start from 20 mm thickness to even 100 mm thickness   that work beautifully alongside granite outdoor tiles.
• New Halayb Granite wall cladding with bush hammered and flamed finish ,honed finish and also polished finish are suitable for wall cladding in malls and huge buildings
• Granite Cobblestones tumbled Installing Natural Granite Cobblestones will give your home a sense of timeless history! Granite Cobblestone blocks are hand cut and have a tumbled appearance

• New Halayb Granite Egyptian Granite Countertop Installation process:

Strengthen Your Countertop

1. Cut 9 cm (0.75 inch) plywood to reinforce the cabinet surface.
   • Get an oversized rocking board the same size as the counter model. Place it on the table, against the wall, and use it again to mark where to cut. Cut a piece of wood and use a circular saw to drill a hole for the sink. • When measuring and cutting plywood, pay attention to the overhang at the top of the table.
2. 2. To attach plywood to the cabinet, you must screw the
   • Reach under the counter and use a drill to remove the corners of the cabinet’s vertical bars. Screw the wood panel vertically into the counter. The distance between the screws is 20-25 cm. Make sure plywood is leveled on all cabinets before drilling.
3. 3. Wrap plywood with waterproof film for safety
   Go to a low spot under the counter and use a drill bit into one of the corners. • Place the small, low rollers in the paint bucket with the waterproof membrane. Stick the film on the entire surface of the plywood. Allow to dry overnight before proceeding with installation.
   • Impregnation film protects plywood from moisture causing blistering.

Fit the granite slab to Cut.

1. Dry the granite
   • Arrange the granite slabs to see how they fit on your countertop. Be careful not to break or damage it.
2. 2. Trace the desired cut with painter’s tape or a white
   • Place the granite slab on the bench template. Make any necessary adjustments to the outer edges and mark them off.
3. Use a wet hand-held circular saw to cut the granite block.

• Wet saws are best for cutting granite. Large amounts of dust are minimized. Place the saw just outside the drawing line and slowly cut the granite block with the saw blade.

4. Polish the edge of the granite slab with a wet grindstone.

• Turn on the grinder and place the rounded edge of the tool near the edge of the granite you want to smooth. Once smooth, gently slide the roller along the edge of the board.

5. Attach the sink and seal the top and bottom edges.
   • Insert the sink into the sink hole to seal. Apply sealant to the granules around the sink above the granite. Climb under the sink and apply more glue where the sink hangs on the bottom of the cabinet.

• Granite

The word “granite” comes from the Latin word “granum” which means coarse grain. They concluded that the unique classification of the rock was due to its roughness:
Granite is the second hardest natural material after diamond, easily surpassed. Granite is considered an igneous rock, which is light and rough in color. Granite is wear-resistant, strong enough to support some weight, and inert enough to withstand the elements. Good polishing is also possible.

It forms when magma slowly crystallizes below the earth’s surface. In particular, granite is large, rough, and massive (meaning it has no internal structure). These properties have made granite a popular building material throughout history. Due to its timeless beauty and the fact that no synthetic material can match its elegance and performance, it has essentially replaced plastic as the preferred choice for homes. and luxury stores.

Granite is the oldest igneous rock in the world, but it may have formed gradually over 300 million years. The term “plutonic” refers to granite that occurs naturally deep underground. Granite makes up most or a significant portion of the earth’s continental crust. Granite has been used in construction since ancient Egypt. In many cases this is very important. These properties make granite slabs suitable for stairs, outdoor walkways and kitchen countertops.

• Egyptian granite

Egyptian granite was one of the first materials quarried and used by Egyptian pharaohs. Due to its color and hardness, it was used to distinguish Egyptian statues and artifacts from others. The majority of granite minerals are feldspar, quartz, mica, and amphibole. These minerals are associated with a somewhat homogeneous and interconnected matrix of feldspar and quartz, with dark biotite crystals and sporadic hornblende (usually hornblende) interspersed with paler colored minerals. than. interlaced. Depending on its composition, granite can have a base color of white, pink, gray, or black

Where Can I View New Halayb Granite ?

We are happy to send you a sample. Please request yours Contact US.

Egyptian halayb granite Colours available

• Yellow
• Black
• Silver
• Gray
• Pink
• White
• red

As the leading Egyptian natural stone supplier, CIDG group for Egyptian Granite are industry leaders in supplying superior quality natural stone, provides customized dimensions as needed for your project’s requirements through our 3 factories in Egypt for granite tiles and slabs and 6 gray granite quarries. Exporting Egyptian natural stone to all world.

We suggest consulting with our inhouse designers and stone experts to select the appropriate granite color and finishing to meet the purpose of your project.